SADDLE STRUCTURE
Our Startrekk Saddles are high quality treeless saddles, which conform to the horses back nicely and let you enjoy a really close feel, yet provide plenty of stability to ensure proper weight distribution along the horses back, without causing sharp pressure points. The Startrekk Treeless line saddles have a rigid, interchangeable fork (many designs available, from baroque to western fork, etc. see sizing information below) -OR- a fully adjustable fork (1 design only)
FORK WIDTH
The Fork on all of our Startrekk saddles is interchangeable and comes in a variety of sizes to help find the best fit for your horse. On some models, it's possible to build in our fully adjustable fork system, which means the fork never has to be exchanged in order to change the fork's width and it can be done via a small Allen wrench. There's a discrete slot to insert the allen wrench, and you can widen or narrow the fork just like that! To determine which Fork size you will need, please download our Instructions and the gullet width measurement template for the fork you would like to use with your saddle:
Delfin Fork
adjustable fork via
6mm allen wrench
(not available for all models)
Icelandic Fork
K1 ≈ size 6 of Sprenger Wither Gauge
K2 ≈ size 5 of Sprenger Wither Gauge
K3 ≈ size 4 of Sprenger Wither Gauge
K4 ≈ size 3 of Sprenger Wither Gauge
K5 ≈ size 2 of Sprenger Wither Gauge
K6 ≈ size 1 of Sprenger Wither Gauge
Dressage /
All Purpose Fork
K1 ≈ size 6 of Sprenger Wither Gauge
K2 ≈ size 5 of Sprenger Wither Gauge
K3 ≈ size 4 of Sprenger Wither Gauge
K4 ≈ size 3 of Sprenger Wither Gauge
K5 ≈ size 2 of Sprenger Wither Gauge
K6 ≈ size 1 of Sprenger Wither Gauge
Endurance Fork
N1 ≈ 6.5” inches - Steep or Flat
N2 ≈ 6.9” inches - Steep or Flat
N3 ≈ 7.3” inches - Steep or Flat
Classic Fork
Western
N1 ≈ 6.5” inches - Steep or Flat
N2 ≈ 6.9” inches - Steep or Flat
N3 ≈ 7.3” inches - Steep or Flat
Espaniola Fork
K1 ≈ size 6 of Sprenger Wither Gauge
K2 ≈ size 5 of Sprenger Wither Gauge
K3 ≈ size 4 of Sprenger Wither Gauge
K4 ≈ size 3 of Sprenger Wither Gauge
K5 ≈ size 2 of Sprenger Wither Gauge
Espaniola
Deluxe Fork
K1 ≈ size 6 of Sprenger Wither Gauge
K2 ≈ size 5 of Sprenger Wither Gauge
K3 ≈ size 4 of Sprenger Wither Gauge
K4 ≈ size 3 of Sprenger Wither Gauge
K5 ≈ size 2 of Sprenger Wither Gauge
Classic Fork
Comfort
K1 ≈ size 6 of Sprenger Wither Gauge
K2 ≈ size 5 of Sprenger Wither Gauge
K3 ≈ size 4 of Sprenger Wither Gauge
K4 ≈ size 3 of Sprenger Wither Gauge
K5 ≈ size 2 of Sprenger Wither Gauge
Instructions for
measurement template
Download and follow
instructions to find the perfect fit
SEAT SIZES
Our saddles are available in the following seat sizes
Startrekk Espaniola
S1 TBA
S2 TBA
Startrekk Comfort
S1 approximately 17 inches
S2 approximately 18 inches
Startrekk Classic
S1 approximately 14.5 inches
S2 approximately 15.5 inches
Startrekk Endurance Classic
S1 approximately 14.5 inches
S2 approximately 15.5 inches
Startrekk Espaniola
S1 approximately 50 cm / 19.5 inches
S2 approximately 52 cm / 20.5 inches
Startrekk Comfort
S1/S2 approximately 59 cm / 23 inches
Startrekk Commander
S1/S2 approximately 63 cm / 25 inches
SADDLE LENGTH
PANELS
Startrekk Treeless saddles come with detachable Velcro panels that can be placed where needed. This gives you a great advantage when fitting your saddle to your horse, because you can change the gullet width within a minute. When you order a saddle from us, the standard panels that will be delivered with your saddle are always E.V.A. 0.5". Please contact us if you are wanting to get a different size of panels. The other panels have to be made and special ordered. Felt (ca. 1 cm) (Standard)
• E.V.A. 0.5"
• E.V.A. 1" Standard
• E.V.A. 1" + 0.5" soft foam filling
• E.V.A. 1" + 1" soft foam filling
• E.V.A. 1" covered with real sheepskin
E.V.A. = Ethylene-vinyl acetate
_edited.jpg)
